Installation Guide: CNC RACING Slipper Clutch Pressure Plate for MV Agusta Explained
The CNC RACING Slipper Clutch Pressure Plate is a high-performance upgrade designed to enhance the riding experience of MV Agusta owners, especially those riding models like the Dragster 800 RR. This component improves clutch feel, reduces rear-wheel hop under aggressive downshifts, and offers smoother control for both street and track use.
If you’re considering this upgrade, this comprehensive guide will walk you through the installation process and highlight why this product is a must-have for serious riders.
Why Upgrade to the CNC RACING Slipper Clutch Pressure Plate?
The slipper clutch pressure plate is crucial for reducing engine braking forces during downshifts, helping to prevent rear wheel lockup and maintaining bike stability. The CNC RACING version is crafted from premium materials with precision engineering, delivering superior durability and performance.
Compared to the stock clutch pressure plate, this upgrade offers:
- Improved modulation and smoother clutch engagement
- Reduced rear wheel hop during aggressive downshifting
- Enhanced durability with CNC-machined precision
- Better heat dissipation to avoid clutch fade
For MV Agusta Dragster 800 RR riders looking for an all-around upgrade, pairing the slipper clutch pressure plate with other premium parts like the QD Exhaust Triple Slip-On Exhaust (Power Gun Silver) or the Power Gun Dark EU Homologated Exhaust can further elevate performance and sound.
Tools and Materials Needed
- Socket set and torque wrench
- Allen keys
- Clutch holding tool (optional but recommended)
- Clean rags and degreaser
- Thread locker (medium strength)
- The CNC RACING Slipper Clutch Pressure Plate
Step-by-Step Installation Process
1. Preparation and Safety
Park your MV Agusta on a stable stand and ensure the engine is cool before beginning work. Disconnect the battery for safety. Remove any fairings or covers obstructing access to the clutch cover.
2. Remove the Clutch Cover
Using the appropriate socket or Allen key, remove the bolts securing the clutch cover. Carefully take off the clutch cover, being mindful of the gasket to avoid damage. It’s a good idea to inspect or replace the gasket if worn.
3. Access the Clutch Assembly
With the clutch cover removed, you will see the clutch basket and the stock pressure plate. Use a clutch holding tool to prevent the basket from rotating while loosening the pressure plate bolts.
4. Remove the Stock Pressure Plate
Loosen and remove the bolts holding the stock pressure plate. Carefully take out the plate, noting the orientation and position of any springs or washers for correct reassembly.
5. Install the CNC RACING Slipper Clutch Pressure Plate
Place the CNC RACING slipper clutch pressure plate into position, aligning it precisely as the original. Secure the plate with the bolts, applying medium-strength thread locker on the threads to prevent loosening.
Use a torque wrench to tighten the bolts to the manufacturer’s specified torque settings to avoid damage.
6. Reassemble the Clutch and Cover
Double-check that the clutch components are properly aligned. Reinstall the clutch cover with a new or inspected gasket to ensure a tight seal. Tighten all clutch cover bolts to specification.
7. Final Checks
Reconnect the battery. Test the clutch lever for smooth operation and proper engagement. Start the engine and check for any leaks or unusual noises. If possible, take a short ride to ensure the slipper clutch operates as expected, reducing rear wheel hop and providing smoother downshifts.
Additional Upgrades for Your MV Agusta
To complement your new slipper clutch pressure plate, consider installing other CNC RACING parts designed for the MV Agusta Dragster 800 RR, such as the Oil Bath Clear Clutch Cover with Hydraulic Control or the Clutch Cover Slider. These additions protect your clutch system while enhancing the bike’s aesthetics.
Why Buy from Desmoheart?
Desmoheart is a trusted retailer specializing in high-quality MV Agusta parts and accessories. They offer authentic CNC RACING components backed by expert customer service and worldwide shipping.
The SP301 CNC RACING MV Agusta Slipper Clutch Pressure Plate is readily available on their website with detailed product descriptions and competitive pricing, making your upgrade process seamless.
Final Thoughts
Upgrading to the CNC RACING Slipper Clutch Pressure Plate is an excellent choice for any MV Agusta rider looking to improve clutch performance, enhance ride quality, and reduce rear-wheel hop. With straightforward installation and a robust design, this product will serve both street riders and track enthusiasts alike.
Take your MV Agusta experience to the next level by visiting Desmoheart’s product page today and get your slipper clutch pressure plate.