CNC RACING Ducati 6‑Holes Gear Ring: Performance Meets Precision

Upgrading your Ducati's drivetrain is one of the most effective ways to enhance your bike’s performance, responsiveness, and efficiency. If you're an enthusiast, racer, or performance-seeker, the CNC RACING Ducati 6 Holes Gear Ring is a premium component that deserves your attention.

Built for precision, durability, and compatibility, this gear ring is part of a performance-focused sprocket system that not only boosts your bike’s output but also transforms how it feels under acceleration. In this guide, we’ll explore the technical specs, benefits, compatibility, and most importantly where to buy the CNC RACING 6 Holes Gear Ring with confidence.

What is the CNC RACING Ducati 6 Holes Gear Ring?

The CNC RACING Ducati 6 Holes Gear Ring is a lightweight yet ultra-strong sprocket ring designed to replace your stock rear sprocket when used in conjunction with CNC RACING’s full rear sprocket kit. Engineered with precision and crafted from aerospace-grade ergal aluminum, this gear ring is anodized to ensure wear resistance and a long service life, even under the most demanding riding conditions.

Key Specifications

• Material: CNC-machined Ergal 7075-T6 aluminum
• Finish: Hard anodized for enhanced wear resistance
• Tooth Configurations: Available in multiple Z (tooth count) options from Z38 to Z43
• Pitch Sizes: Compatible with P520 and P525 chains
• Design: 6-bolt mounting system for secure installation
• Fitment: Works only with CNC RACING rear sprocket systems

Benefits of the CNC RACING 6 Holes Gear Ring

1. Improved Power Transfer

One of the most noticeable upgrades comes in the form of improved throttle response. Thanks to reduced rotational mass and high-precision machining, the CNC RACING gear ring enhances the efficiency of power delivery from your engine to the rear wheel.

2. Reduced Unsprung Weight

The lightweight ergal construction significantly reduces unsprung weight compared to OEM steel sprockets. This benefits overall suspension performance and contributes to faster turn-in, better handling, and improved traction.

3. Durability Meets Performance

Ergal 7075-T6 is known for its outstanding strength-to-weight ratio. Combined with a hard anodized surface, this gear ring resists wear and deformation over time, even when subjected to the brutal forces of aggressive riding or track use.

4. Customization Options

Available in various tooth counts, the 6 Holes Gear Ring allows riders to tailor their final drive ratio to their riding style:

• Fewer teeth: better top-end speed
• More teeth: increased torque and acceleration

5. Italian Craftsmanship

CNC RACING is a renowned name in Italian motorsport engineering. Every gear ring is manufactured in Italy to the highest standards of precision and quality control, ensuring it lives up to the Ducati name.

Compatibility: What Bikes Does It Fit?

The CNC RACING 6 Holes Gear Ring is designed for a broad array of Ducati models. It's not a universal part it’s a performance-specific component that integrates with CNC RACING’s proprietary sprocket kits.

Compatible Ducati Models Include:

• Panigale V4 / V4S / V4R
• Panigale V2
• Panigale 899 / 959 / 1199 / 1299
• Streetfighter V4
• Diavel (various models)
• Multistrada 1200 / 1260 / V4
• Monster 1200 / 821
• Hypermotard 950
• Supersport 939 / 950

Important Note: This gear ring is not compatible with the OEM (stock) Ducati sprocket mounting system. It is designed to be used only with CNC RACING’s rear sprocket kits, which include the appropriate flange, cush drive, and hardware.

How to Choose the Right Tooth Count and Pitch

One of the most customizable aspects of the CNC RACING 6 Holes Gear Ring is the ability to choose the Z (tooth count) and P (chain pitch) based on your performance goals.

Complete the Kit: Compatible Sprocket Kits

To get the full performance and compatibility benefits of the 6 Holes Gear Ring, it must be paired with the correct CNC RACING sprocket kits. Here are a few examples of complete kits available:

• CNC RACING Ducati Panigale V4 Rear Sprocket Kit
• CNC RACING Ducati Panigale V2 Full Rear Sprocket Kit
• CNC RACING Ducati Panigale 1199/1299 Full Rear Sprocket Kit

How to Install the CNC RACING 6 Holes Gear Ring

Installation Tips

1. Remove the Rear Wheel – Always support the bike securely before wheel removal.
2. Replace the Sprocket Carrier – Use the CNC RACING 6-hole sprocket flange.
3. Torque to Spec – Use a torque wrench and follow Ducati specifications.
4. Check Chain Alignment – Make sure alignment is straight and tensioned properly.
5. Test Ride Carefully – Ride slowly and verify proper function before aggressive use.

Real-World Performance Feedback

"I noticed immediate differences in throttle response and overall feel. The quality is top-notch, and everything bolted up perfectly."
— Ducati Panigale V2 owner

Where to Buy the CNC RACING Ducati 6 Holes Gear Ring

Recommended Retailer: Desmoheart

You can purchase the gear ring from Desmoheart, a trusted distributor of CNC RACING products:

Buy the CNC RACING Ducati 6 Holes Gear Ring from Desmoheart

• 100% genuine CNC RACING products
• Multiple configurations and fitment support
• Competitive pricing
• Worldwide shipping
• Fast and secure checkout

Final Thoughts: Is It Worth the Upgrade?

The CNC RACING Ducati 6 Holes Gear Ring is more than just a replacement part it's a performance enhancement that reflects Italian engineering at its finest. Whether you ride for fun, for speed, or for competition, this gear ring delivers tangible improvements in handling, acceleration, and reliability.

Key Takeaways

• Reduces unsprung weight for better handling
• Offers custom tooth and pitch configurations
• Works with Ducati’s top sport and street models
• Requires CNC RACING rear sprocket hardware
• Backed by performance riders and pros alike

Ready to upgrade your ride? Click below to explore configurations, compatibility, and pricing:

Shop the CNC RACING Ducati 6 Holes Gear Ring on Desmoheart