Search Results

Used to fit CNC Racing right handlebar switches if the main fixing system on the front brake master cylinder cannot be used. CNC machined from solid light alloy, anodized surface. 📦 Includes one clamp and two black galvanized screws 🛠 Scheme & Installation  APPLICATION: Aprilia RSV4 R / RSV4 Factory (2009...

CNC machined of solid light alloy, anodized surface. Replace the original iron screws that often get rusted or oxidized. 📦 3 screws set Available separately: ➧ CNC RACING ZA965 Carbon heat guard APPLICATION: Ducati MONSTER 1200 / 1200S (2014 – )Ducati MONSTER 1200R (2016 – 2019) Ducati MONSTER 821 (2014 – 2020)

CNC machined of light alloy billet and then given a colored anodized surface finish. The design is characterized by the double machining.🔧 Plug & play, no modification required, replace the OEM plate 🛠 Scheme & Installation Available separately: ➧ CNC RACING DA502 Rear wheel nut bi-color (left) APPLICATION: Ducati HYPERMOTARD 1100...

CNC machined of light alloy billet and then given a colored anodized surface finish. The design is characterized by the double machining.🔧 Plug & play, no modification required, replace the OEM plate 🛠 Scheme & Installation Available separately: ➧ CNC RACING DA503 Rear wheel nut bi-color (right) APPLICATION: Ducati HYPERMOTARD 1100...

CNC machined of billet aluminum, anodized surface. 🔧 Ready for assembly, no modifications required 🛠 Scheme & installation APPLICATION: Ducati HYPERMOTARD 821 / SP / Hyperstrada (2013 — 2015) Ducati MONSTER 600 (1994 — 2002) Ducati MONSTER 620 (2002 — 2006) Ducati MONSTER 695 (2006 — 2008) Ducati MONSTER 750 (1996 —...

Right handlebar switch for OEM and RCS Brembo brake master cylinder. The switch body is machined from full 7075 aluminum (ergal) bars and has then undergone a hard black anodizing process that enhances processing with CNC machinery. All the buttons compliant with the IP67 military standard. The switch itself is water...

Right handlebar switch for Brembo billet CNC and forged brake master cylinder. The switch body is machined from full 7075 aluminum (ergal) bars and has then undergone a hard black anodizing process that enhances processing with CNC machinery. All the buttons compliant with the IP67 military standard. The switch itself is...

Bike accelerator control handlebars fitted with Ride By Wire electronic control. Constructed in special plastic material by turning and milling. Allows to install the following grips (available separately): ➧ CNC RACING MP100 Lab One grips ➧ CNC RACING MP105 Evo grips APPLICATION: Ducati DIAVEL 1260 / 1260S (2019 – 2022) Ducati...

CNC machined of billet aluminium, anodized surface. 🛠 Scheme & Installation APPLICATION: Ducati 1199R PANIGALE (2015 – 2017) Ducati 899 PANIGALE (2013 – 2015) Ducati 1299 / 1299S PANIGALE (2015 – 2017) Ducati 959 PANIGALE (2016 – 2019)

Designed to protect the engine from accidental knocks or slides Very light yet strong structure Continuous testing to ensure withstanding the most demanding use Perfect geometry to fit bodywork of all kinds without any changes required Accurate mathematical calculations, mechanical stress analyses and physical testing have all gone in to...

Reduces the effort required to pull the clutch lever in addition to giving a race-style look. CNC machined of light alloy billet, anodized surface finish. 🔧 Direct fitment, no modifications needed 📜 Product scheme 🛠 Instructions for installation ⚠ Warning: use DOT4 brake fluid only APPLICATION: Ducati 1199 / 1199S / 1199R PANIGALE...

CNC machined of billet aluminum, anodized surface. Includes: OHLINS SD000 63 mm steering damper DUCABIKE steering collar COS04 DUCABIKE mounting kit SAS06 📦 All necessary bolts supplied APPLICATION: Ducati MONSTER 796 / 1100 Evo

OHLINS 63 mm steering damper with DUCABIKE mounting kit and fuel tank cap for Ducati Scrambler. CNC machined of billet aluminum, anodized surface. Includes: OHLINS SD000 63 mm steering damper DUCABIKE fuel tank cap TSB04 DUCABIKE steering collar COS04 DUCABIKE mounting kit SAS08 📦 All necessary bolts supplied APPLICATION: Ducati...

CNC machined from titanium billets. 📦 8 screws set APPLICATION: CNC RACING PSB07 TRIPLE CLAMPS BOTTOM PLATE

Derived directly from the collaboration with the teams of SBK and MotoGP on the race tracks, are excellent for improving grip and aesthetics of the bike. The manufacture make the footrest less slippery transferring security and tranquility in the guide. CNC machined of billet, anodized surface. 🏁 WorldSBK & MotoGP...

Instrument protection film kit. 2 anti-scratch films protecting from scratches and dust; 2 anti-scratch and anti-glare films protecting from scratches and reducing harmful glare for good data display; 1 product application kit for easy DIY fitting; Detailed assembly instructions. APPLICATION: Ducati 1199 / 1199S / 1199R PANIGALE (2012 – 2017) Ducati 1199 PANIGALE Superleggera (2014)...