Search Results

CNC machined of billet aluminum, anodized surface. 🔧 Ready to install, replace the OEM lever without modification ⚠ Notice: this lever is sold without lever pin to give you the opportunity to combine the preferred lever pin Available separately: ➧ DUCABIKE RPLF08 Brake lever ➧ DUCABIKE RPPIF01 Eccentric lever pin...

CNC machined of billet aluminum, anodized surface. 🔧 Replace the OEM lever without modification ⚠ Notice: this lever is sold without lever pin to give you the opportunity to combine the preferred lever pin Available separately: ➧ DUCABIKE RPLC09 Shift lever ➧ DUCABIKE RPPIF01 Eccentric lever pin ➧ DUCABIKE RPPIR01E...

Carbon fiber, mat finish. Made in Italy. 📦 2 pieces, screws included APPLICATION: Ducati PANIGALE 1199 / 899 / 1299 / 959 / V2 (2012/2024) OEM REARSET or DUCABIKE PR119902 ADJ. REARSET DUCABIKE PR119903 ADJ. REARSET

OHLINS 68 mm steering damper with DUCABIKE support (for Ohlins fork diameter 53 mm) for Ducati 1199S / 1299S / 899 / 959 / V2 Panigale. CNC machined of billet aluminum, anodized black surface. Allows use of any other handlebar. The kit includes: OHLINS SD040 68 mm steering damper DUCABIKE support SAS02 🔧 Ready...

CNC machined of billet aluminum, anodized surface. 🔧 Ready to assembly APPLICATION: Ducati MONSTER 821 (2014 – 2021) Ducati MONSTER 950 / 937 (2021 – ) Ducati 899 / 959 PANIGALE Ducati PANIGALE V2 (2025 – )

Steering damper by Ohlins for Ducati Panigale models. An important ingredient in almost every successful racing team throughout the world and a massive hit on the aftermarket since the launch. The concept still beats the competition in damping performance and agility, thanks to the pressurized system and tight tolerances, as well...

CNC machined of full aluminum 7075 t6, anodized surface. Assembly on the front wheel stud, protects legs fork in case of falling. 🔧 Ready to install APPLICATION: Ducati DIAVEL 1200 / 1260 Ducati DIAVEL V4 (2023 – ) Ducati 1199 / 899 / 1299 / 959 PANIGALE Ducati PANIGALE V2 (2020 – 2024) Ducati PANIGALE...

Improves front flexibility, cancels the chattering effect. CNC machined of billet aluminum 7075 with 3D technology, anodized black surface. 🏁 MotoGP design 🔧 Ready to mount, replace the OEM part APPLICATION: Ducati 1199 PANIGALE (2012 – 2014; ÖHLINS fork 53 mm)Ducati 1199S PANIGALE (2012 – 2014) Ducati 1199R PANIGALE (2013...

CNC machined of solid ergal, anodized surface, plastic caps 280 mm. Compatible with standard control block. 🔧 Simple installation APPLICATION: Ducati 1199 / 1199S / 899 / 1299 / 1299S / 959 PANIGALE

CNC machined of full aluminum 7075 t6, anodized surface. Assembly on the front wheel stud, protects legs fork in case of falling. 🔧 Ready to install 🛠 Scheme & installation APPLICATION: Ducati DIAVEL 1200 / 1260 Ducati DIAVEL V4 (2023 – ) Ducati 1199 / 899 / 1299 / 959 PANIGALE Ducati PANIGALE V2 (2020...

Bushings for triple clamps, CNC machined of solid aluminum alloy, anodized surface. Allows you to adjust the progress of the steering plates leading +4 mm to -4 mm to the bike set up. APPLICATION: CNC RACING PST02 TRIPLE CLAMPS TOP PLATE

Wind shield for Ducati 1199R / 1299 / 959 Panigale by CNC Racing. More protective than OEM due to the raised central bubble. Made of 3 mm cast and thermo-formed acrylic (PMMA). 🔧 Replaces the original equipment without any modification APPLICATION: Ducati 1199R PANIGALE (2012 – 2017) Ducati 1299 / 1299S PANIGALE (2015 –...

Fuel tank sliders made of carbon fiber reinforced with Kevlar. Protects the tank when sliding. Available in mat or glossy finish. ⚠ Silicone is recommended for the installation ⌚ Please note that this is exclusively made product and may take up to 20-30 days for production APPLICATION: Ducati 1199 / 1199S...

Made of mat finish carbon using an autoclave process and hand finished for product quality and uniqueness. 🔧 Direct fitment, no modifications needed ⌚ Please note that this is exclusively made product and may take up to 20-30 days for production Available separately: ➧ CNC RACING ZA845 Carbon rear fender...

Quality and uniqueness by CNC Racing. 100% carbon fiber texture plain and mat finish. Autoclave process production. 🔧 No modifications required ⌚ Please note that this is exclusively made product and may take up to 20-30 days for production APPLICATION: Ducati 1199 / 1199S / 1199R PANIGALE (2012 – 2017) Ducati 1199...

"Gear" handlebar weights grant an attractive race design, replacing the stock plastic/iron parts. Double machining design. CNC machined of light alloy billet, anodized surface finish. 📦 2 pieces kit, all screws included 📜 Product scheme 🛠 Instructions for installation ⚠ If your motorcycle equipped with standard handguards, remove them before the...